Epoxy Resin Injection Grout
Two Component Grouting Material
High Permeability Modified Two Component Epoxy Resin Injection Grout Concrete Repair Grouting Material
The high permeability modified epoxy is a low viscosity, double liquid, low temperature hardened, hardened type of epoxy for injection repair. The product can be cured in water, curing time can be controlled, non-shrinkage after curing characteristics, mainly used for concrete structure crack leakage repair. It has excellent binding force for various structures, especially for the reinforcement of concrete leakage. With the aid of mechanical high-pressure injection, the product can fully achieve the effect of water-proof and structural reinforcement for the micro-cracks in the structure.
Polyurethane Grouting Fluid · Grouting Material · Made In China
Product Features
—
1. Double liquid type, operating at room temperature. Material A and material B through the special double liquid epoxy grouting, machine mixing after pouring, the effect is better.
2. The consolidated body strength is big, after the synthesis water does not disperse, the high bonding, after the curing toughness is high, does not shrink.
3. Applicable to all concrete structure of the structure of the leakage water plugging and structural reinforcement.
Polyurethane Grouting Fluid · Grouting Material · Made In China
Applicable area:
—
1. Reinforce, strengthen and prevent leakage of tunnels, subways and other underground structures.
2. Reinforcement and reinforcement of defects such as honeycombs and cracks of building beams, columns and piles.
3. Corrosion prevention, reinforcement, waterproofing and seepage prevention of dams, ports, docks, swimming pools, water towers, etc.
4. It is suitable for the joint sealing of water pipelines and chemical pipelines.
Construction method
—
1.The preparation of grouting liquid: (according to the weight ratio of modified epoxy resin: curing agent=1:1), pour the curing agent into the modified epoxy resin, disperse and mix it evenly with manual or slow electric mixer, The stand-by time is about five minutes.
3. After about 72 hours of curing, the exposed grouting nozzle can be cut off and restored with cement mortar.
4. The prepared grouting solution should be used up all at once.
5. The construction temperature should be above 5 degrees, and the construction site should be ventilated.
6. The construction personnel must wear labor protection supplies and pay special attention to eye protection.
7. Pay close attention to the pressure gauge when grouting to avoid bursting of the grouting pipe due to excessive pressure.
8. After grouting, clean the pressure grouting machine and other construction tools with a cetone in time.
Note
—
Because this product reacts quickly after deployment, it should be prepared and used immediately during construction.
Polyurethane Grouting Fluid · Grouting Material · Made In China
Performance
—
| Number | Test Items | Index |
| | Project Nam | Unit |
| 1 | Density | G/Cm3 | >1.00 |
| 2 | Compressive Strength | Mpa | ≥ 70 |
| 3 | Tensile Strength | Mpa | ≥ 15 |
| 4 | Dry Bond Strength | Mpa | ≥ 4.0 |
| 5 | Wet Bonding Strength | Mpa | ≥ 3.0 |
| 6 | Impermeability Pressure | Mpa | ≥ 1.2 |
| 7 | Anti-seepage pressure ratio | % | ≥ 400 |
Polyurethane Grouting Fluid · Grouting Material · Made In China
Plugging and reinforcing epoxy resin grouting fluid
—
Modified epoxy chemical grouting fluid is a new chemical grouting reinforcing material with low viscosity and high strength. It is composed of modified epoxy resin and curing agent. Under the action of curing agent, it not only achieves the function of plugging, but also realizes the effect of reinforcement. It is suitable for repairing concrete gap and foundation grouting reinforcement of airport runway, reservoir, dam, port and wharf. Chemical grouting for tunnels, basements, air raid shelters, culverts and mines of underground works.And the internal and external crack plugging and reinforcement works of beam, slab, column structure, kitchen, bathroom, pool and swimming pool of civil buildings. Also repair and reinforcement of honeycomb defects in beams, slabs, columns and walls of building structures.
| Product Model | 1:1
Epoxy resin grounting material | 4:1
Epoxy resin grounting material |
| Product Proportion | main agent :10kg,curing agent :10kg | main agent :20kg,curing agent :5kg |
| Mixing Ratio | A:B = 1:1 | A:B = 4:1 |
| Slurry Density (G/Cm3) | 1.16 | 1.16±0.05 |
| Initial Viscosity(Mpa/S) | 190 | 30minutes(23℃ ±2℃ ) |
| Initial Hardening | 40minutes-2hours | 10hours |
| Completely Hardened | 3-7days | 3-7days |
| Operational Time | 40minutes | 40minutes |
| Viscosity | 100-500 MPA.S | 100-500 MPA.S |
| Tensile Strength | 20MPA | > 15MPA |
| Compressive Strength | 70MPA | ≥ 70MPA |
| Tensile Shear Strength | 8.5 | ≥ 8.0 |
| Bond Strength | 6.0MPA | |
| Impermeable Pressure | 1.5 | ≥ 1.2 |
| Permeation Pressure Ratio(%) | 450 | ≥ 400 |
Polyurethane Grouting Fluid · Grouting Material · Made In China
Different Proportion.sample Effect Display
—
1:1
Synthetic resin type mixed into a milky yellow liquidroom temperature about 30 minutes to set.
2:1
Fast curing, mixed with light yellow!Initial setting at room temperature about 30 minutes
4:1
High permeability, mixed with a light red amber color!Initial setting at room temperature about 30 minutes
Polyurethane Grouting Fluid · Grouting Material · Made In China
Sample ratio complete hardening effect diagram
—
Material ratio method
—
Polyurethane Grouting Fluid · Grouting Material · Made In China
Products Advantage
—
1. Dense without bubbles, high strength, Normal temperature hardenincHigh adhesion,no shrinkage
2. High intensity, hammer smashing constantly , Low viscosity and toughness
3. Reinforcement and imperme ability engineering waterproof, Solve the problem of water leakage in building cracks and reinforce buildina bodies
Strong Bonding Forcereinforcement Does Not Leak
Polyurethane Grouting Fluid · Grouting Material · Made In China
Product packaging
—
1. Stored in clean, dry and sealed iron drums
2. Transport according to regular product requirements, prevent rain, exposure, squeezing, and collision, and ensure that th packaging is intact.
3. The product should be stored in a ventilated, dry and cool place, away from direct sunlight and rain. The storage temperature should not be higher than 40℃.
4. Under normal storage conditions, the shelf life is 9months.
Polyurethane Grouting Fluid · Grouting Material · Made In China
About Us
—
Lihong Technology continues to increase its investment in advanced safety and environmental protection facilities. It is a second-level enterprise for production safety standardization, and many of its products have passed food-grade product certification.The company always adheres to the bottom line that quality is life, establishes and operates advanced quality management system and information management system, effectively improves product quality process control. Relying on advanced technology and equipment, it actively creates world-class product quality and corporate image.
The company has always insisted on leading high-quality development with technological innovation. The company currently has more than 30 high-end talents in the industry and has three R&D platforms: Jiangsu Technology R&D Center, Jiangsu Polyurethane New Material Engineering Technology Research Center, and Jiangsu Special Polyurethane New Material Engineering Research Center.
The company has 5 invention patents, 22 utility model patents, and more than 10 invention patents are being applied for.The company's research and development of specific functional flame-retardant polyether polyols has been identified as a key R&D project in Huai'an City.
About Us ( Click to enter )
Quality Control ( Click to enter )
Polyurethane Grouting Fluid · Grouting Material · Made In China
FAQ
—
1. Worried about maintaining a seamless supply chain?
As proud manufacturers, we boast an expansive 8000 square meter warehouse,ensuring a robust and abundant supply capacity at all times.
2. Can't receive prompt replies?
Our dedicated team and AI customer service are at your service 24/7,, ready to meticulously address every inquiry, ensuring you experience peace of mind and ease.
3. Is finding product information proving difficult?
Enjoy complimentary access to product samples, and comprehensive test certificates.
4. Concerned about maintaining top-notch quality?
4. We are committed to rigorous technical inspections before each sale, guaranteeing our quality meets the highest standards.
5. Unfamiliar with the technology?
Our team of expert consultants is on hand to offer you complimentary, cutting-edge technical advice.
6. Is your forwarder unable to manage the goods?
Our seasoned chemical export service team provides comprehensive services including declaration, transportation, insurance, and customs clearance, ensuring a smooth, worry-free journey from start to finish.
Polyurethane Grouting Fluid · Grouting Material · Made In China
Product Tags:
|
|
High Hardness Epoxy Resin Injection Grout Modified Construction Materials for Reinforcing Voids in Building & Subway Walls Modified Epoxy Grouting Images
|
